Keep your rods secure with the Marine Raider Heavy-Duty Boat Rod Holder. The rod holder is made of heavy-duty powder-coated steel for durability and universally clamps onto jon boat rails with the included hardware.
Features and Benefits
Clamps onto jon boat rails
Heavy-duty powder-coated steel construction
Important Product and Safety Information
Proposition 65 warning for California residents: WARNING - This product contains one or more chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
What's in the Box
Marine Raider Heavy-Duty Boat Rod Holder
Product height (in.):
Product width (in.):
Rated 3 out of
You get what you pay for...I bought these because I wanted something I could put on my pontoon boat for the morning and then remove them, they were cheap enough so what the heck. The first thing I noticed was the thumbscrew to tighten it down seemed kind of small, and sure enough, there's no way you can get enough torque on these to have them be secure... out come the pliers, now when you really crank on it, it starts to slide off the rail I'm clamping it to (metal on metal) my remedy was to cut a couple pieces of shim stock to put between the clamp and the rails of the boat. It does help but I'm still nervous that a big enough fish is just going to take it all!! The holder itself is fine, the metal is thick and sturdy, I take away 2 stars for the poor clamp design.
Date published: 2016-03-24
Rated 5 out of
JUST RIGHTI'm allowed two lines in the water when freshwater fishing and these allow me to do just that. These are strong and easy to use and allow me to free my hands up for other purposes. Durable and easily carried and stored these make excellent stocking stuffers.
Date published: 2015-11-20
Rated 5 out of
JoKaMo joe from
Compact and StrongGreat For Boat rentals and Owners. I've shared these with family and friends and they all love them. In case of thin hull row boats I carry a small plug of approx. L3"X W "3X H 1" inch wood to offset the gap often found on these boats so the clamp fits securely.
Date published: 2015-07-10
Rated 5 out of
Slab Master from
Great value! Awesome tool for gaint slabsPurchased last week. Exactly what I was looking for and delighted at the price. Works great to fasten to the dock walkway hand rails and wait for the crappie to inhale my jig or minnow while hand free to set the hook on any of the 6 rods set up in front of me. Fun!
Date published: 2015-05-27
Rated 4 out of
LOOK ..NO HANDS !I HAVE NOT HAD A CHANCE TO USE THIS BUT FEEL IT WILL WORK .
Date published: 2014-11-01
Rated 5 out of
Yanceyville Girl from
Great productI got these rod holders for my husband and he loves them. I got them for his birthday. He tells everyone how great they are. When I told him how much I paid for them and he did not believe me, so I had to show him the site.
Thank you so much for such a wonderful product that is very sturdy. You offer top of the line for a reasonable price.
Date published: 2014-10-04
Rated 2 out of
Its an ok rod holderI purchased this rod holder because I needed free hands while unhooking and baiting other lines. This rod holder has two design problems. 1st is the mechanism for attaching it to the boat, its not sturdy but ok if you have a completely flat surface to mount it on. 2. The holes the rods go into are to big and not adjustable. This rod holder takes some rigging to make it serviceable unless you have a really thick fishing rod.
Date published: 2014-05-16
Rated 5 out of
Just what I was looking forThe rod holders were just what I was looking for. They were hard to locate but when I found the right place to locate them, they were there. I will use Academy again. Thanks!!!
From time to time, Academy Sports + Outdoors runs sweepstakes in connection with its Ratings and Reviews. Certain of the reviews posted above on this page may have entitled the author to a sweepstakes entry.
The Marine Raider Heavy-Duty Boat Rod Holder clamps onto jon boat rails.
Answered by: KimberlyR
Date published: 2015-03-02
how wide is the clamp ?
Asked by: mibe
The Marine Raider Heavy-Duty Boat Rod Holder has the clamp width of 2.75 inches
Answered by: Academysportsandoutdoors
Date published: 2014-09-23
will it clamp to a rounded edge on a jon boat
Asked by: ss735
The Marine Raider Heavy-Duty Boat Rod Holder is made of heavy-duty powder-coated steel for durability and universally clamps onto jon boat rails with the included hardware.
Answered by: Johanna
Date published: 2014-06-26
Is this product large enough to hold my Okuma "Tundra" river rod, or any river rod for that matter, and will it stand up to strong pressure?
Asked by: RelicFisher
The Marine Raider Heavy-Duty Boat Rod Holder is made of heavy-duty powder-coated steel for durability and should withstand strong pressures. The rod holder itself has a width of 2.75" which should hold your rod.
Answered by: ATaylor
Date published: 2014-01-07
Do you ship worldwide? I am from Malaysia and would like to purchase 10 pieces of the rod holder. Kindly reply via email, thank you.
Asked by: KevinL
At this time, we do not ship outside of the United States unless it is to an APO/FPO (U.S. military base).
Answered by: AmandaG
Date published: 2013-12-18
do you know if these will work for catfishing want to clamp them on a alumacraft bass boat
Asked by: reddog
The Marine Raider Heavy-Duty Boat Rod Holder features heavy-duty powder-coated steel construction which is recommended for fishing in big water and for heavier conditions and offers the durability needed for catfishing.
Great for use with casting and spinning rods,
the Attwood® Heavy-Duty Adjustable Rod Holder features a 180° vertical adjustment range that allows a variety of rod tip height settings. The rapid-release latch mechanism is easy to find, while the large, ...
RAM RAM-RODÂ Light-SpeedÂ Rod Holder with RAM-RODÂ Revolution
The RAM RAM-ROD Light-Speed Rod Holder with RAM-ROD
Revolution Ratchet Arm is suited for spinning and baitcasting reels and is made of high-strength composite and powder-coat, marine-grade aluminum for durability. The holder rotates 360° and tilts forward and backward, while ...
The RAM RAM-TUBE 2008 Fishing Rod Holder with
Round Flat Surface Base features a self-draining, quick-access design that accommodates most rods. Made of high-strength composite and powder-coat, marine-grade aluminum for durability, the holder's rubber ball and socket technology provides adjustability ...