Main content starts here.
21280411.99USD

Driftmaster Pro Series 1/2" Thread Round Rail Clamp Base

$1199
SKU: 017447194ITEM: 204-B

The Driftmaster Pro Series 1/2" Thread Round Rail Clamp Base for 7/8" round rails can be used with any Pro Series rod holder. The base can be easily adjusted by loosening 1 nut and turning the base on the rail, allowing you to control the angle of your rod. The 1/2" diameter threaded center hole can also hold any lantern holder.

Features and Benefits

  • 1/2" diameter threaded center hole provides great holding power
  • Can be easily adjusted to control the rod angle
  • For use with 7/8" round rails
  • Compatible with any Pro Series rod holder or lantern holder
  • Hardware included

What's in the Box

  • Driftmaster Pro Series 1/2" Thread Round Rail Clamp Base
  • Hardware

The Driftmaster Pro Series 1/2" Thread Round Rail Clamp Base for 7/8" round rails can be used with any Pro Series rod holder. The base can be easily adjusted by loosening 1 nut and turning the base on the rail, allowing you to control the angle of your rod. The 1/2" diameter threaded center hole can also hold any lantern holder.

Features and Benefits

  • 1/2" diameter threaded center hole provides great holding power
  • Can be easily adjusted to control the rod angle
  • For use with 7/8" round rails
  • Compatible with any Pro Series rod holder or lantern holder
  • Hardware included

What's in the Box

  • Driftmaster Pro Series 1/2" Thread Round Rail Clamp Base
  • Hardware
SKU: 017447194
ITEM: 204-B

The Driftmaster Pro Series 1/2" Thread Round Rail Clamp Base for 7/8" round rails can be used with any Pro Series rod holder. The base can be easily adjusted by loosening 1 nut and turning the base on the rail, allowing you to control the angle of your rod. The 1/2" diameter threaded center hole can also hold any lantern holder.

Features and Benefits

  • 1/2" diameter threaded center hole provides great holding power
  • Can be easily adjusted to control the rod angle
  • For use with 7/8" round rails
  • Compatible with any Pro Series rod holder or lantern holder
  • Hardware included

What's in the Box

  • Driftmaster Pro Series 1/2" Thread Round Rail Clamp Base
  • Hardware

The Driftmaster Pro Series 1/2" Thread Round Rail Clamp Base for 7/8" round rails can be used with any Pro Series rod holder. The base can be easily adjusted by loosening 1 nut and turning the base on the rail, allowing you to control the angle of your rod. The 1/2" diameter threaded center hole can also hold any lantern holder.

Features and Benefits

  • 1/2" diameter threaded center hole provides great holding power
  • Can be easily adjusted to control the rod angle
  • For use with 7/8" round rails
  • Compatible with any Pro Series rod holder or lantern holder
  • Hardware included

What's in the Box

  • Driftmaster Pro Series 1/2" Thread Round Rail Clamp Base
  • Hardware