Set hooks instantly with the Driftmaster Pro Flatliner Rod Holder. Designed for use in straight down fishing or baitcasting, the holder keeps rod tips at a 25° angle so they stay out of the water under rough conditions. The rod's V-shaped front allows for right or left hook sets, while the extended cradle is contoured to provide hand clearance for quick grabs. The rod holder features durable 1/2" diameter plated steel stems, a 1-3/4" width for larger rod handles and is recommended for line weights over 25 lb. Made in USA.
Features and Benefits
For use in straight-down fishing or where bait is cast away from the boat
Recommended for line weights over 25 lb.
1/2" diameter plated steel stems are durable
1-3/4" wide to accommodate large rod handles
Extended cradle is contoured to provide hand clearance for quick grabs
Holds the rod tip at a 25° angle to help keep it out of the water under rough conditions
V-shaped front offers right or left hook sets
Fully adjustable side-to-side
Can be removed easily for storage
Made in USA
Manufacturer warranty - general:
What's in the Box
Driftmaster Pro Flatliner Rod Holder
Rated 4 out of
Solid construction, reasonable price.These are not stainless steel and were not advertised as such. Stainless steel for a heavy duty rod holder that may be used in salt and fresh water should be the standard. Coating the threads with a corrosion resistant grease may help delay some corrosion for a while but these will eventually rust at the threads and under the plastic coating causing problems.
Date published: 2016-10-20
Rated 5 out of
Drift Master Rod Holders.Love them, they are easy to install and my clients can't go wrong with them. Best there is!!!