Main content starts here.
3145549.99USD

Driftmaster Li'l Pro Series 3/8" Thread Round Clamp Base

$999
SKU: 017448341ITEM: 214-B

The Driftmaster Li'l Pro Series 3/8" Thread Round Clamp Base for 7/8" rails can be used with any Li'l Pro Series rod holder. The base can be easily adjusted by loosening 1 nut and turning the base on the rail, allowing you to control the angle of your rod. Features a 3/8" diameter threaded center hole.

Features and Benefits

  • 3/8" diameter threaded center hole provides great holding power
  • Can be easily adjusted to control the rod angle
  • For use with 7/8" round rails with any Li'l Pro Series rod holder
  • Hardware included

What's in the Box

  • Driftmaster Li'l Pro Series 3/8" Thread Round Clamp Base
  • Hardware

The Driftmaster Li'l Pro Series 3/8" Thread Round Clamp Base for 7/8" rails can be used with any Li'l Pro Series rod holder. The base can be easily adjusted by loosening 1 nut and turning the base on the rail, allowing you to control the angle of your rod. Features a 3/8" diameter threaded center hole.

Features and Benefits

  • 3/8" diameter threaded center hole provides great holding power
  • Can be easily adjusted to control the rod angle
  • For use with 7/8" round rails with any Li'l Pro Series rod holder
  • Hardware included

What's in the Box

  • Driftmaster Li'l Pro Series 3/8" Thread Round Clamp Base
  • Hardware
SKU: 017448341
ITEM: 214-B

The Driftmaster Li'l Pro Series 3/8" Thread Round Clamp Base for 7/8" rails can be used with any Li'l Pro Series rod holder. The base can be easily adjusted by loosening 1 nut and turning the base on the rail, allowing you to control the angle of your rod. Features a 3/8" diameter threaded center hole.

Features and Benefits

  • 3/8" diameter threaded center hole provides great holding power
  • Can be easily adjusted to control the rod angle
  • For use with 7/8" round rails with any Li'l Pro Series rod holder
  • Hardware included

What's in the Box

  • Driftmaster Li'l Pro Series 3/8" Thread Round Clamp Base
  • Hardware

The Driftmaster Li'l Pro Series 3/8" Thread Round Clamp Base for 7/8" rails can be used with any Li'l Pro Series rod holder. The base can be easily adjusted by loosening 1 nut and turning the base on the rail, allowing you to control the angle of your rod. Features a 3/8" diameter threaded center hole.

Features and Benefits

  • 3/8" diameter threaded center hole provides great holding power
  • Can be easily adjusted to control the rod angle
  • For use with 7/8" round rails with any Li'l Pro Series rod holder
  • Hardware included

What's in the Box

  • Driftmaster Li'l Pro Series 3/8" Thread Round Clamp Base
  • Hardware