The Rule Rule-mate® 750 gph Bilge Pump is an all-in-one pump and switch that can run dry for up to 2 hours for convenience. Designed to fit in the lowest part of the bilge for efficient pumping, the pump features a 3/4" discharge outlet for easy setup. The pump will not pump oil and has a snap-off strainer for easy cleaning.
Features and Benefits
Can run dry for up to 2 hours for convenience
All-in-one pump and switch; no float switch required
Snap-off strainer for easy cleaning
3/4" discharge outlet for easy setup
12 VDC for powerful pumping
Designed to fit in the lowest part of the bilge for easy setup
Will not pump oil
What's in the Box
Rule Rule-mate® 750 gph Bilge Pump
Product width (in.):
Manufacturer warranty - general:
3 years limited
Product height (in.):
Rated 5 out of
Great priceIt was fast shipping and the price was about re same to anywhere else
Date published: 2015-09-10
Rated 5 out of
Good productPurchased this product to replace the factory pump in a ranger and it functioned flawlessly.
Date published: 2014-04-26
bvseo_cps, prod_bvrr, vn_cps_3.2.0
co_hasreviews, tv_0, tr_2
loc_en_US, sid_006058507P, PRD, sort_mostRecent
bvseo_sdk, java_sdk, bvseo-3.1.1
CLOUD, getReviews, 1ms
From time to time, Academy Sports + Outdoors runs sweepstakes in connection with its Ratings and Reviews. Certain of the reviews posted above on this page may have entitled the author to a sweepstakes entry.
I have a rule-mate 750 that needs to be replaced. Want to replace with same. Do the wires connected to the existing pump pull out like a plug from an outlet? Or do I have to cut the wires and reconnect the new pump using some kind of connectors?
Asked by: Ben Spon
Hello Ben Spon,
In regards to the Rule Rule-mate® 750 gph Bilge Pump, you have to cut the wires and reconnect the new pump using connectors.
Answered by: Tpayne2
Date published: 2015-07-17
Is this a two wire or three wire installation?
Asked by: Roadhog
The Rule Rule-mate® 750 gph Bilge Pump has a 3 wire installation. The black pump wire connects to negative (-) side of the battery. Brown pump wire connects to the automatic side of the switch. Brown with white stripe wire connects to the manual side of the switch.
Features and Benefits. 36" lengths of 16 gauge
tinned copper wire, caulked to prevent water from wicking through insulation jacket. For boats up to approximately 17'. Capacity of 500 gph at open flow, drawing only 1.5 amps; 350 gph at ...
Made of high-impact plastic for durability, the Marine
Raider 800 Gph Bilge Pump is corrosion and salt resistant so it can withstand the elements. The 12V DC motor provides strong power, while the universal clip-in base offers easy installation and ...
Features and Benefits. Designed for pumps drawing up
to 14 amps at 12 VDC. Mercury-free snap switch provides dependable control. Marine-grade blocked wire for a reliable connection. Removable base for easy cleaning and service. 2-1/4"H x 5"W x 1-3/4"L. What's ...