The Rule 500 gph Bilge Pump can run dry for up to 2 hours for convenience and can be operated by using a float or hydroair switch. Designed to fit in the lowest part of the bilge for efficient pumping, the pump features a 3/4" discharge outlet for easy setup.
Features and Benefits
Can run dry for up to 2 hours for convenience
3/4" discharge outlet for easy setup
Can be operated by using a float or hydroair switch
Designed to fit in the lowest part of the bilge for easy setup
12 VDC for powerful pumping
What's in the Box
Rule 500 gph Bilge Pump
Manufacturer warranty - general:
3 years limited
Product height (in.):
Product width (in.):
bvseo_sdk, java_sdk, bvseo-3.1.1
CLOUD, getReviews, 0ms
bvseo-msg: The resource to the URL or file is currently unavailable.;
From time to time, Academy Sports + Outdoors runs sweepstakes in connection with its Ratings and Reviews. Certain of the reviews posted above on this page may have entitled the author to a sweepstakes entry.
I have an 2002 175 alumacraft boat- need a replacement aerator pump (12V, 2.5 amp). This pump looks the same, but mine has no blue cap and has a discharge out the bottom with a 1 inch nylon piece that attaches to the live well. Is this the same?
Asked by: EJHJR
Without seeing the item you are attempting to replace, we are unable to determine if the Rule 500 gph Bilge Pump is a like item.
As always, Academy wants all customers to be fully satisfied with their purchases, and our Returns Policy reflects this commitment. You can return merchandise purchased at an Academy store or at academy.com to any Academy store for refund or exchange. For detailed information about our returns policy, please visit https://www.academy.com/shop/en/store/shop-with-confidence.
Answered by: KimberlyR
Date published: 2016-07-05
is there any way i can see the back picture of the pump where the wire and the plug are showed?
Asked by: tuan1904
At this time we do not have any other pictures of the Rule 500 gph Bilge Pump. Please check back at a later date.
Answered by: KimberlyR
Date published: 2015-11-15
Does this unit come with the appropriate wiring? If not how would I connect this to my jet ski?
Asked by: JetSkiGuy
The Rule 500 gph Bilge Pump includes two wires, one for power and the other for ground.
Answered by: Tpayne2
Date published: 2015-07-17
Since there are no screw-down brackets on this pump, how is this unit mounted and secured to the boat?
Asked by: Hank25
The Rule 500 gph Bilge Pump is mounted by removing the base to the pump which can then be screwed to the bottom of your boat and then reattaching the rest of the pump.
Features and Benefits. High-efficiency pump moves water and
oxygen into livewell tanks to keep fish active. Cartridges are replaceable and interchangeable between bilge and aerator pumps. Watertight seals and waterproof wiring for safe, efficient operation. 36" wire connector. 500 gph ...
Features and Benefits. Barbed outlet with 3/4" inner
diameter. 36" wire connector. 12V. Replaceable and interchangeable motor core for simple and quick servicing. Important Product and Safety Information. Proposition 65 warning for California residents: WARNING - This product contains one ...
Features and Benefits. Ball-style scupper for effective drainage.
Replaces flapper scuppers. Retrofits all hole patterns. Stainless-steel lock screw ensures safe use. Seal slotted to fit over 1-1/4" motorwell tubes. Clear. Twist-off design offers easy debris removal. Polycarbonite. What's in the ...