Replaceable and interchangeable motor core for quick and easy servicing
Important Product and Safety Information
Proposition 65 warning for California residents: WARNING - This product contains one or more chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
What's in the Box
Attwood® Tsunami T500 Bilge Pump
Manufacturer warranty - general:
3 years limited
bvseo_sdk, java_sdk, bvseo-3.1.1
CLOUD, getReviews, 0ms
bvseo-msg: The resource to the URL or file is currently unavailable.;
From time to time, Academy Sports + Outdoors runs sweepstakes in connection with its Ratings and Reviews. Certain of the reviews posted above on this page may have entitled the author to a sweepstakes entry.
The Attwood® Tsunami T500 Bilge Pump should be positioned in the lowest possible part of the bilge. On sailboats, location should be centered over keel. Do not mount pump directly to hull. Attach base strainer to a marine plywood mounting pad that is fiberglassed to the hull. The bilge pump is designed to exhaust STANDING WATER ONLY. It is not intended to prevent rapid accumulation of on-board water due to rough weather, hull damage, and/or other unsafe navigational conditions.
Answered by: KimberlyR
Date published: 2016-10-04
Is the motor submersible
Asked by: Steel Man
It has to be submersed to work
Answered by: ohmygosh
Date published: 2016-06-10
Will this product replace the v500 attwood ile ump
Asked by: Greta1
The Attwood® Tsunami T500 Bilge Pump features a barbed outlet with 3/4" inner diameter and has a 36" wire connector. This pump has an amp draw of 1.8 and a rated voltage of 12V. Please use this information to determine if this will work as a replacement for you. You may, also, contact the manufacturer for further information. You can reach attwood by visiting www.attwoodmarine.com or by calling (616) 897-9241.
Answered by: KimberlyR
Date published: 2015-11-07
how does this mount to the bottom of bilge
Asked by: Fish4
In regards to the Attwood® Tsunami T500 Bilge Pump, I have located the installation guide from the manufacturer: http://www.attwoodmarine.com/userfiles/store/product/files/990/tsunami-bilge-pump-instr.pdf
Answered by: Tpayne2
Date published: 2015-07-15
How many amps does it draw?
Asked by: izzy7688
The Attwood® Tsunami T500 Bilge Pump has an amp draw of 1.8.
Answered by: HeatherF
Date published: 2015-02-11
can this be bought with a threaded outlet? 4606th1
Asked by: renas
At this time, we only offer the Attwood® Tsunami T500 Bilge Pump with a barbed outlet with 3/4" inner diameter.
Featuring a dual-mount design for transom or straight
mounting situations, the Marine Raider 800 Gph Livewell Pump is compatible with most Livewell systems. This pump is made of high-impact plastic for durability and provides corrosion and salt resistance to stand ...
Features and Benefits. Ball-style scupper for effective drainage.
Replaces flapper scuppers. Retrofits all hole patterns. Stainless-steel lock screw ensures safe use. Seal slotted to fit over 1-1/4" motorwell tubes. Clear. Twist-off design offers easy debris removal. Polycarbonite. What's in the ...
Features and Benefits. Moves more water and oxygen
into livewell tanks to keep fish active. Cool-running motors, premium materials, watertight seals and waterproof wiring. 3/4" threaded outlet. 36" wire. 3-1/2"L x 3/4" inlet with NPSM thread. Important Product and Safety ...