The rugged Attwood® Boat Cover Support System helps prevent water from pooling in the center of your boat cover to protect it and extend its working life. The system's under-the-cover design requires a wooden 2 x 4 (not included) to support your cover and keep it from sagging. For use with boats up to 22'.
Features and Benefits
Prevents water from pooling in the center of a boat cover
Rugged design for an extended working life
For boats up to 22' long
Top plate, bottom plate and tie-down system combine with a wooden 2 x 4 (not included) for proper configuration
Important Product and Safety Information
Proposition 65 warning for California residents: WARNING - This product contains one or more chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
What's in the Box
Attwood® Boat Cover Support System
Rated 3 out of
Good for snowThis boat cover support system works fairly well for snow. You will need to go and shake the cover every once in a while to get the snow off the low spots but most will roll right off. If it's put on perfectly, which I've only done a few times, rain will run right off. I use this for my 17ft bass boat and most of the time it pools on the bow even though this system has straps that go over the bow.
I quit using this as it takes a little bit to put on and only provides mediocre support. I wouldn't buy it again but others may have more luck.
From time to time, Academy Sports + Outdoors runs sweepstakes in connection with its Ratings and Reviews. Certain of the reviews posted above on this page may have entitled the author to a sweepstakes entry.