The Rule Rule-mate® 750 gph Bilge Pump is an all-in-one pump and switch that can run dry for up to 2 hours for convenience. Designed to fit in the lowest part of the bilge for efficient pumping, the pump features a 3/4" discharge outlet for easy setup. The pump will not pump oil and has a snap-off strainer for easy cleaning.
Features and Benefits
Can run dry for up to 2 hours for convenience
All-in-one pump and switch; no float switch required
Snap-off strainer for easy cleaning
3/4" discharge outlet for easy setup
12 VDC for powerful pumping
Designed to fit in the lowest part of the bilge for easy setup
Will not pump oil
What's in the Box
Rule Rule-mate® 750 gph Bilge Pump
Product width (in.):
Manufacturer warranty - general:
3 years limited
Product height (in.):
Rated 5 out of
Great priceIt was fast shipping and the price was about re same to anywhere else
Date published: 2015-09-10
Rated 5 out of
Good productPurchased this product to replace the factory pump in a ranger and it functioned flawlessly.
From time to time, Academy Sports + Outdoors runs sweepstakes in connection with its Ratings and Reviews. Certain of the reviews posted above on this page may have entitled the author to a sweepstakes entry.
I have a rule-mate 750 that needs to be replaced. Want to replace with same. Do the wires connected to the existing pump pull out like a plug from an outlet? Or do I have to cut the wires and reconnect the new pump using some kind of connectors?
Asked by: Ben Spon
Hello Ben Spon,
In regards to the Rule Rule-mate® 750 gph Bilge Pump, you have to cut the wires and reconnect the new pump using connectors.
Answered by: Tpayne2
Date published: 2015-07-17
Is this a two wire or three wire installation?
Asked by: Roadhog
The Rule Rule-mate® 750 gph Bilge Pump has a 3 wire installation. The black pump wire connects to negative (-) side of the battery. Brown pump wire connects to the automatic side of the switch. Brown with white stripe wire connects to the manual side of the switch.
Features and Benefits. High-efficiency pump moves water and
oxygen into livewell tanks to keep fish active. Cartridges are replaceable and interchangeable between bilge and aerator pumps. Watertight seals and waterproof wiring for safe, efficient operation. 36" wire connector. 500 gph ...
Features and Benefits. Replaceable and interchangeable motor core
for simple and quick servicing. 36" wire connector. Barbed outlet with 3/4" inner diameter. 12V. Important Product and Safety Information. Proposition 65 warning for California residents: WARNING - This product contains one ...
Features and Benefits. Ball-style scupper for effective drainage.
Replaces flapper scuppers. Retrofits all hole patterns. Stainless-steel lock screw ensures safe use. Seal slotted to fit over 1-1/4" motorwell tubes. Clear. Twist-off design offers easy debris removal. Polycarbonite. What's in the ...