Designed to conform easily to the curves of your firearm, the Camowraps® Realtree Max-5® Shotgun Kit includes precut pieces for the barrel, receiver, fore-end and stock. Adds a Realtree Max-5® camo pattern to 1 shotgun.
Features and Benefits
Conform easily to the curves of your firearm
Includes precut pieces for the barrel, receiver, fore-end and stock
Adds a Realtree Max-5® camo pattern to 1 shotgun
What's in the Box
Manufacturer warranty - general:
Manufacturer warranty - parts:
bvseo_sdk, java_sdk, bvseo-3.1.1
CLOUD, getReviews, 0ms
bvseo-msg: The resource to the URL or file is currently unavailable.;
From time to time, Academy Sports + Outdoors runs sweepstakes in connection with its Ratings and Reviews. Certain of the reviews posted above on this page may have entitled the author to a sweepstakes entry.
will it fit a 12g O/U and how does it adhere to the gun? Can it be removed and reapplied?
Asked by: Patrick121
The Camowraps® Realtree Max-5® Shotgun Kit fits up to a 32" barrel.
HOW TO INSTALL YOUR CAMO SHOTGUN KIT:
Field Strip Gun
Clean outside of Gun with Alcohol removing all excess dirt or oil, then wipe Dry.
Identify the Pieces in the Kit from the Diagram Below.
Note the Diagram for Relief Cut Locations for the Stock, Receiver & Forend. Trim accordingly to your gun.
Remove back paper Liner to Expose Adhesive, Position Camo Pieces over area and lightly press down using your fingers to smooth into place. (If piece is not positioned properly, carefully remove and reposition.)
When all pieces are positioned properly and smoothed, use included squeegee with firm pressure on a 45° angle to set the adhesive.
Finish trimming using light pressure with a sharp razor blade as to not scratch the finish of your gun. Stick any bubbles with a pin and re-squeegee to remove the trapped air.
Answered by: AntoniaD
Date published: 2017-02-06
Will this work on any kind of shotgun
Asked by: Markus1022
The Camowraps® Realtree Max-5® Shotgun Kit fits most auto and pump action shotguns 12 gauge and under.