The Attwood® Universal/Nonmarine Fuel Line Kit is compatible with Evinrude engines as well as 1 - 350 HP OEM engines and can be used with ethanol-blended fuels. This kit features a universal sprayless connector that is compatible with fuel tanks with a 1/4" NPT output, a multilayer, low-permeation primer bulb and a low-permeation, fiber-reinforced fuel hose that is designed to prevent kinking and hardening when used with ethanol-blended fuels. EPA and CARB certified.
Features and Benefits
Universal configuration includes no engine or tank fitting and is compatible with Evinrude engines, OEM engines (1hp - 350 hp) and ethanol-blended fuels
Universal sprayless connector is compatible with fuel tanks with a 1/4" NPT output, replaces traditional tank fittings and eliminates spray when connecting or disconnecting fuel fittings
Fuel hose rated up to 100°C and 600 PSI
Leak-free, stepless 360° stainless-steel clamps and hose barbs designed for use in pressurized fuel systems
Multilayer, low-permeation primer bulb included
Low-permeation fiber-reinforced fuel hose is designed to prevent kinking and hardening when used with ethanol-blended fuels
EPA and CARB certified
Important Product and Safety Information
Proposition 65 warning for California residents: WARNING - This product contains one or more chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
What's in the Box
Mutlilayer, low-permeation primer bulb
Universal sprayless connector
Low-permeation fuel hose
Manufacturer warranty - general:
Rated 5 out of
Worked perfect for my 2005 MercuryWent through my whole Bass Trackers fuel system due to the previous owner leaving stale fuel in the system. Decided to replace my fuel primer line with the Attwood's Universal setup from Academy as none of the local stores had the original engine connector for my boat. Swapped the engine connector to this fuel line and have had no problems with the primer bulb or line. I did not use the supplied fitting or the fitting that came on the new fuel line, but I have had no loss of prime or fuel leaks.
Date published: 2016-10-05
Rated 1 out of
Hose is BAD, BAD, BADI bought this hose kit to use on my 15hp Suzuki 2 stroke. When my engine couldn't run at full speed and would choke, I took the hose off thinking the bulb's check valve was malfunctioning. What I found was that the inner lining (Plastic thin membrane) had separated from the outer rubber sheath and collapsed. Additionally I found that the inner sheath did not stretch around the hose fitting when pushed on and had bunched up around the fitting's bore opening also restricting fuel flow. This stuff is junk. Read around the net, I am not the only person this has happened too. If I still had my receipt, I would return it.
From time to time, Academy Sports + Outdoors runs sweepstakes in connection with its Ratings and Reviews. Certain of the reviews posted above on this page may have entitled the author to a sweepstakes entry.
The Attwood® Universal/Nonmarine Fuel Line Kit is 6 feet in length.
Answered by: KimberlyR
Date published: 2016-06-13
Will this hose fit on a 20HP Tohatsu outboard
Asked by: dragracer4185
The Attwood® Universal/Nonmarine Fuel Line Kit is compatible with Evinrude engines as well as 1 - 350 HP OEM engines and can be used with ethanol-blended fuels. This kit features a universal sprayless connector that is compatible with fuel tanks with a 1/4" NPT output.
Answered by: KimberlyR
Date published: 2016-01-06
What fuel line will fit a 15hp Johnson outboard?
Asked by: T Dub
Hello, T Dub.
The Attwood Universal/Nonmarine Fuel Line Kit features a universal sprayless connector that is compatible with fuel tanks with a 1/4" NPT output. Please check your outboards manufacturer specifications to check for compatibility.